scutiger Now • 94%
Home versions, which most home users have, force the use of MS accounts. They've patched the bypass tricks that people used before.
scutiger Now • 85%
They're suing because Microsoft got an exclusion from the Digital Markets Act. Google did not.
scutiger Now • 100%
I assume an octopus would spend less time in your stomach than a hamburger would. Like a few seconds, probably. It would likely be fine just passing through.
scutiger Now • 100%
The cuzzif. Cuzzif it wasn't there, your guts would fall out.
scutiger Now • 80%
I don't think that's what that means. I believe "hostile" in this sense is closer in meaning to "contrary." It's hostile to the owner's rights, not hostile to the owner.
You have to make it clear that you're living there with regular upkeep. Mow the lawn, fix up the house, etc. You can't hide the fact that you're living there from the owner or neighbors.
If the owner shows up one day and discovers you've been living there, they can politely ask you to leave and now you're officially trespassing and you lose your claim to adverse possession.
If you've made it clear that you live there, and your neighbors all know you, but the real owner has never showed up in 15 years, or just doesn't care and never asked you for rent or asked you to leave, congrats on your new property.
scutiger Now • 100%
It takes 15 years of squatting to gain adverse possession. That is to gain ownership of the property, you have to live there for 15 years without the owner making an active effort to stop you.
scutiger Now • 100%
Mine are similar to yours, but only two relatively short periods per year. It hits me mid-spring, and end of summer.
As for your allergy testing, it's likely you're not really allergic to all of the allergens you were tested for. In many cases for those tests, if a few of the allergens trigger a reaction, then all or most of the injection sites will react rather than just the ones you're allergic to. It helps when you can tell in the moment which one started it, since reactions happen quite quickly.
scutiger Now • 100%
I don't know that much about Brad Pitt, but while Tom Cruise is a sleazebag in many other ways, he's one of the hardest working people in Hollywood.
But he also had work done, yes.
scutiger Now • 100%
The point was that the Steam Deck is not a particularly powerful PC and it can still run it fine.
scutiger Now • 100%
Elden Ring plays fine on Steam Deck. Its actual requirements are pretty reasonable.
scutiger Now • 100%
As long as you're making an effort, that's really what matters. Nobody's going to be offended by a small mistake or slip-up. Just apologize and move on.
Trans people are people after all, and all they want is to be treated as such. They don't want preferential treatment, just to be treated like everyone else.
If you're an introvert, then you probably don't want to attract attention to yourself in most cases. Same thing here.
scutiger Now • 100%
I've been on a Darksynth kick lately. Perturbator, Carpenter Brut, Shredder 1984.
scutiger Now • 100%
Approximately 168 football fields. Approximately precise.
scutiger Now • 80%
All 4 of these statements are true.
scutiger Now • 100%
Yes, yes, of course I think my idea was nuts. I just didn't want to say so. Totally not lying about it right now.
scutiger Now • 100%
If you can't figure out how to open a PDF, I really don't want to work for you.
scutiger Now • 100%
There's no way they're giving you an "upgrade" for free. Don't worry, as long as you don't pay for it, you're not getting the new version.
scutiger Now • 100%
I didn't like the trickle that I got, so I tried removing it, and it was high flow but not enough pressure, so I just used a drill to enlarge the hole a little bit and it's much better.
scutiger Now • 100%
Boiling the frog and whatnot.
It's easier to accept this annoyance and move on. And then the next one. And the next. Why bother fighting anything at that point? It's easier to let them step on us and be thankful they'll take our money for it.
I just bought a nice OLED monitor and I'm trying to take advantage of it to play my games in HDR. If I run my games in gamescope, then HDR runs fine but my PS4 controller doesn't work. If I play without gamescope, the controller works, but HDR does not. I've been trying to figure this out for a bit, and some people have been having some luck with the -e flag, which does nothing for me.I've tried Steam Input and overlay in all combinations of enabled and disabled and I've tried in big picture/gamepadui. Either way I have to choose between HDR and the controller. Has anyone gotten this to work?
I modeled an object in Blender intending to print it, but when I import it into PrusaSlicer or Cura, the dimensions don't quite match. In Blender, the dimensions are 178mm x 142mm, but when I import it into Cura or PrusaSlicer, it imports it as 180 x 138mm. I can manually adjust the dimensions, but why is this happening? And will it mess up my fit in the end? Who do I trust here? I don't want to waste hours printing for nothing.
www.youtube.com
I've been listening to this a bunch lately. This is the cleanest-sounding concert recording I've ever found on youtube.
I want to put grilled paneer, arugula, and salmon roe on a cracker as an appetizer or early snack. I feel like the salty/umami roe with the bitter/peppery freshness of arugula on the grilled paneer would taste nice. In terms of texture there would be the chewy/squeaky cheese, the crispy cracker, and the pop of the roe. I'm thinking a cracker like a triscuit, but I feel like they're too thick for what I'm trying to put together. Anyway, before I spend time and money to make a concoction that tastes like garbage, does anyone have any opinions or suggestions?
I have a model I want to print that has multiple layers of internal walls. They are useless and can't be seen in the finished product, like a hollow cylinder inside another hollow cylinder. I can't seem to figure out how to prevent the slicer from including those useless parts. I've tried with Cura and PrusaSlicer. Is there another tool I should be using for this?
Is there a way to automatically locally save Spotify music as I listen to it? Or to access/convert the files that Spotify saves for offline playback?
I just got my printer, got it all set up, followed all the instructions, and it looks like it should be working, but it's not. I've gone through the auto bed leveling, then adjusted the height with a piece of paper. Now, trying to run my first test print, the only thing the printer will do is attempt to auto-level itself. If I let it go, it will just do it over and over. If I hit the stop button, it gives me error message 203 (Probing Failed), the screen locks up, and the printer keeps attempting to auto-level over and over. The only thing I can do is turn it off. What am I missing? Edit: So it turns out the included test files are no good. I downloaded a benchy and it printed just fine.
When you make something that's too big for your printer, how do you hide the seams from bonding when aesthetics are a priority?
This is one of two habanero plants I started as an experiment a couple months ago. This one has about 40 peppers growing on it right now and a ton of open flowers. It spent most of its time in a tent, but I brought it outside about a month ago, and it's taking quite a liking to real sunshine.
Anyone have any experience playing over Steam Link on wifi? It seems like no matter what I do, the performance is really shitty. Both the host and the client are in line of sight of the router, and I can get 500+ mbps and my latency seems good, but the performance is garbage. As soon as I go wired, I can get great performance at 100mbps or less. Is there a good way to mitigate this? Am I doing something wrong?
I found the Kharaa antidote in the pengling cave, and I got the voice lines confirming it, but it never unlocked the blueprint for it and I can't craft it. Is there a way around this, or am I missing something else? I didn't want to look up spoilers, but I couldn't find the injectable vessel after I found the vaccine itself, so I looked it up and it said it unlocks after you find the antidote in the cave and you have to craft it.
This is new since yesterday, I don't know what's happening. My PC has been partially powering off suddenly and without warning. My displays lose input, my peripherals turn off, and the computer stops responding to everything. It's still "on" with fans spinning and the power button's LED is lit, but won't respond to holding down the power button to force it to shut off. The only thing I can do is turn it off at the power supply or unplug it. I thought it was a one-time thing, but it happened again today. I've never seen this before. Anyone have any insight into what's happening? Edit: I ran a memory test which came out clear. I ran stress tests on CPU & GPU, which didn't cause any issues. My temperatures have always been fine, with nothing ever going above 75 degrees. Eventually, the BIOS lost track of the date/time so that pretty much gave it away. The computer eventually stopped booting entirely, so I replaced the CMOS battery and everything seems to be running fine for now. For the record, replacing the battery on an ITX build without taking the whole thing apart is somewhat of a pain.
If I open any post that has comments and scroll down, after about 5 seconds, the page just scrolls back up to the top of the page. I think the page is not just scrolling back up but actually refreshing. Is this normal behavior? It has only been happening for me for since today.
Does anyone know how to turn off chat so it doesn't pop up when I open steam? The latest update has re-enabled it for me, and the option to not open it doesn't seem to exist anymore. I have it set to not sign in, which it doesn't, but it still opens the chat box every time.