Tailscale, because it’s a peer-to-peer VPN based on WireGuard with very little setup and Cloudflare Tunnel for external access to HA

Often there aren’t definitive answers, and drying never hurts;)

Have you tried drying it? Sometimes filament is not dried out of the box.

That’s pretty hot for PLA

I have had this for a while, I believe I have enabled experimental features on it.

I have no experience with it, but this is why I’ve mentioned it - for ma y the hardware is already there, or they can upgrade to it and enjoy the additional benefit;)

Some of the newer iPhones feature a LIDAR scanner and there are store apps that can use it to scan too

The K1 series has graphite bushings on the X axis which should be self lubricating and should not be greased.

There’s always a chance your backups might get corrupted too if you let it continue like that

I’d shut it down before it corrupts even more, replace HBA when it arrives and run a scrub to see what’s the damage

Additional question: Developer beta for 18.0 seems like a dead end right? Is the 18.1 beta stable, or did it introduce some weird bugs with the addition of the „AI” to a small portion of users?

How do you attach it?

Yeah, I know that it’s like and English only, but it sure seems like they’re weaponising it to say „EC is bad”

F that, they indiscriminately collected data from European websites, but still somehow won’t release the feature here. This is absolutely a dick move. I don’t understand how they think this is going to play out, but I can’t imagine it being good for anyone (mostly them).

There are some specialised esp32 devices sold with cases (sometimes optional), but 3d printing is another fun thing to get into since you seem bored;)

I am too, and it is really easy to do so. Look up “Linux cpu governor”. NUT (which is the most common UPS management software for Linux) can execute commands, start timers at different events from UPS.

Yeah, that explains stuff. I thought you might have had some stuff on Pi that you could’ve been running on the PC. In that case I’d recommend that you run the NUT on RPi, and set it to pause print on a power failure, possibly change CPU scaling (i.e. to “powersave” CPU governor if you’re running Linux) on the mini PC, or even possibly shut it down in an event when the power outage lasts longer than a minute.

Whatever would support the combined max wattage of the devices you will connect to it. Ideally something that can handle 50-100% more power. You can control some UPSes via USB or network, so you can hook it up to that mini pc or Pi (why are they separate?) and run NUT on it. You could technically pause a print/shut down a computer/Pi if an outage is more than x seconds to reduce power usage and get through one that you otherwise couldn’t.

Yup, same here. Sometimes they wouldn’t bother to call, and would just take the package with them if I wouldn’t answer.

Or tell the courier to leave the package in whatever place I ask them to.