Jerboa 0.0.55-alpha Release
  • oshitwaddup oshitwaddup Now 100%

    Newpipe has it's own fdroid repo, maybe jerboa could do that too?

    3
  • Shit story
  • oshitwaddup oshitwaddup Now 100%

    Absolutely

    2
  • Anon goes on a date
  • oshitwaddup oshitwaddup Now 100%

    Eh, some people don't want to be asked, but also, if they can't handle being asked (especially for the first kiss. Later kisses rarely need to be so explicit) then you're probably dodging a bullet anyways.

    8
  • Shit story
  • oshitwaddup oshitwaddup Now 100%

    another banger from crackermilk (check them out on youtube)

    19
  • I got better reasons buddy
  • oshitwaddup oshitwaddup Now 100%

    Boy-pussy, butt-pussy, back-pussy. There are many paths to the top of the mounain.

    27
  • Anon goes on a date
  • oshitwaddup oshitwaddup Now 93%

    Lots of caveats to this so don't just blindly go around asking people for a kiss or whatever, but for a date, especially the second half or end of the date, I think a good rule of thumb is to assume they want the kiss/hand hold/etc, BUT the critically important thing is you should just ask first and respect whatever answer they give. "Can I hold your hand?", "Do you want to kiss?", etc. If the women in your story and ops had done that, they almost certainly would've gotten what they wanted, but often people expect men to be the one to initiate, and no matter what gender you are it's scary to do anyways.

    13
  • kbin instance running on green energy?
  • oshitwaddup oshitwaddup Now 100%

    Yep, the lemmy devs seem to actively want lemmy to not have that functionality 😔

    3
  • Ignorance is only really appreciated in retrospect. But the damage happens in the present. So how do we avoid the damage?
  • oshitwaddup oshitwaddup Now 100%

    Proactively seek out relevant info, proactively update based on new information, and murphy-jutsu/pre-hindsight (imagine the situation has failed horribly. What went wrong?), to name a few things that help

    2
  • https://fedidb.org/software/kbin

    I'd like to be able to follow users and communities so I'm looking to switch to kbin. Are there any instances that use green energy?

    35
    11
    196
    196 oshitwaddup Now 100%
    Rule
    slrpnk.net

    !energy@slrpnk.net trying to open this community in jerboa

    21
    0
    Proton desktop app in beta
  • oshitwaddup oshitwaddup Now 100%

    Yep, and mullvad vpn has been great on linux, plus they support ipv6 which imo should also be basic/minimum functionality for a modern vpn service

    3
  • Pizza Rule
  • oshitwaddup oshitwaddup Now 100%

    Ah but it's mini-nutrition now, so you have to shrink yourself in order for your body to be able to process it

    8
  • Proton desktop app in beta
  • oshitwaddup oshitwaddup Now 66%

    Same. Terrible linux support for their vpn (on top of all the obvious issues it has, it also requires networkmanager which I don't use, and iirc doesn't support ipv6) drove me away, tuta has been much better imo. Especially since tuta on android doesn't depend on google play services (proton mail does), which should be basic functionality for a privacy focused service

    2
  • Firefox for Android now supports over 450 add-ons
  • oshitwaddup oshitwaddup Now 95%

    Also you can put the url bar on the bottom 😍

    18
  • Firefox for Android now supports over 450 add-ons
  • oshitwaddup oshitwaddup Now 100%

    https://divestos.org/pages/browsers the recommended changes from default settings section should have everything you need to know

    4
  • A masterpiece
  • oshitwaddup oshitwaddup Now 100%

    Honking*

    7
  • What is the best way to safely and completely erase all data from old laptops?
  • oshitwaddup oshitwaddup Now 100%

    In that case, secure wipe should be more than enough

    also, if you're getting rid of them, there might be a charity you can donate them to rather than just tossing them. Idk any off the top of my head, but it seems worth looking into

    13
  • What is the best way to safely and completely erase all data from old laptops?
  • oshitwaddup oshitwaddup Now 91%

    It depends how badly you need that data to never see the light of day again. Most likely, you'll be fine to erase the drives with secure erase options (where it writes 0 and then 1 to the whole drive, and back and forth a few times depending on settings), but if you really really need to 100% guarantee there's absolutely no chance of recovery, then you'll need to destroy the drives physically

    10
  • Ifixit gives fairphone 5 a 10/10 on repairability and maintanence
  • oshitwaddup oshitwaddup Now 100%

    True, but part of the reason they don't go for it is hardware things that are missing

    2
  • Looking to start budgeting, I'd like to be able to use it on both android and linux and use syncthing to sync the file. Is there a good solution for that? it'd be nice if I could easily divide my income into different buckets, add expenses to those buckets, and see how much is remaining in any given bucket for the current month. Less important but still nice would be an easy way to roll surplus into the same bucket for the next month

    20
    11
    accrescent.app

    I recently became aware of the Accrescent app store after reading this article: https://privsec.dev/posts/android/f-droid-security-issues/. It's still in alpha, so it might make sense to wait for it to mature before adding jerboa, but I think it'd be good to have jerboa on there eventually

    27
    5
    connect.mozilla.org

    I really wish there was more word from mozilla on this. There are a few electron apps that I'd much rather use a PWA for so I can totally ditch chromium/electron

    21
    16

    I'm looking for something where I can do some local community building, I'm guessing mastodon might work but I think the ideal is something like facebook where I can join a group tied to a common idea and a location, as well as being a bit more personal. Is there anything like that?

    25
    18
    postimg.cc

    cross-posted from: https://lemmy.antemeridiem.xyz/post/123877 > The main thing I'm not sure about is the gaps on top and the globs and strings on the top and sides. I think the gaps on the bottom might be needing to level the bed and extruders better, and maybe I need to try a raft for the warping? > > I'm using a flashforge creator pro with a glass print bed and layerneer bed weld, happy to fill in any other details too. I'm new to 3d printing so I'm not really sure what all the necessary details might be needed to figure out the problem

    16
    2
    postimg.cc

    The main thing I'm not sure about is the gaps on top and the globs and strings on the top and sides. I think the gaps on the bottom might be needing to level the bed and extruders better, and maybe I need to try a raft for the warping? I'm using a flashforge creator pro with a glass print bed and layerneer bed weld, happy to fill in any other details too. I'm new to 3d printing so I'm not really sure what all the necessary details might be needed to figure out the problem

    13
    6
    196
    196 oshitwaddup Now 100%
    Rule
    78
    2
    196
    195 oshitwaddup Now 90%
    rule
    41
    0
    196
    196 oshitwaddup Now 100%
    rule
    33
    8
    196
    196 oshitwaddup Now 99%
    rule
    121
    5
    196
    196 oshitwaddup Now 99%
    rule
    157
    5
    196
    196 oshitwaddup Now 100%
    rule
    68
    1
    196
    195 oshitwaddup Now 94%
    rule
    33
    0
    oshitwaddup Now
    22 359

    oshitwaddup

    lemmy.antemeridiem.xyz